Rockwool Premium Plus Blow In Attic Insulation

Rock Wool Premium Plus™ Insulation is an eco-friendly product which is setting the standard for the twenty-first century by merging Passive Fire Protection, Acoustical Management, and Energy Efficiency all in one product. Rock wool Premium Plus Insulation is a premium quality rock-fiber insulation produced in a granular form using materials that are reused and sustainable products.

This product is fireproof, sound-proof, moisture-resistant, non-corrosive, non-deteriorating, mildew-proof, vermin-proof and is the “greenest” insulation on the planet today. RockWool Premium Plus™ could be blown dry in to attics and additional open or closed areas. The advantage of “blow-in” insulation is it fill the whole wall or ceiling cavity, around power boxes, wires, and any irregularities linked with timber stud construction and can be applied as a remedial solution once a house is built. Whether a new construction or reconstruction Rockwool Premium Plus™ Insulation has the answer.

Rockwool is an environmentally friendly natural product. There are no chemical preservatives and it will not absorb moisture so it will not support mold, mildew or fungi growing. Rockwool is created by crushing and heating basalt rock until it is molten and then spinning the molten rock into a mineral fibre. The fibre may then be compressed, bound with an adhesive and cut into batts or granulated to form a loose fiber packing.

Rockwool Premium Plus™ Insulating Material includes no chemicals, asbestos or chemical preservatives. It’s non combustible, has no scent and is perfect for people who suffer from allergies. Rock wool Premium Plus Insulation will not settle, decay or corrode for the life of the building. Rockwool Premium Plus is a class 1 fire-rated product.

To install caulk all framework door placements and abutments, windows. Where required, load with a fire-resistant material any areas that can not be satisfactorily attained with air-driven load of RockWool Premium Plus Insulating Material. Install the insulating material into the location to be filled utilizing air-driven machinery. The gear must be fitted with an auxiliary fluid pressure line designed to consistently inject glue to the RockWool Plus Insulating Material. The insulation must be sprayed utilizing equipment and only approved supplies in accordance with all the setup instructions that were present. RockWool Premium Plus™ Insulation should be set up in conditions that enable activation of the adhesive. Sprayed cavities must be dry prior to enclosing with other or gypsum wall-board materials.

The USA Department of Energy advocates homeowners in the USA to have a particular depth of blown-in insulation in their attics. As this may vary you should contact our home insulation pros. To find out more about fireproofing insulation solutions see.

Amerrock, now American Rockwool, manufactures mineral wool loose fibers primarily for residential, commercial, and manufactured housing insulation markets in North America.